while stirring continuously. No significant temperature will accrue during mixing. It is recommended
to filter the solution for several hours before use.
Procedure:
1. Leach tank with 10% volume/volume Sulfuric Acid.
2. Add water 80% of level.
3. Slowly stir in salts until fully dissolved.
a. Starter Salts Cobre @ 2.0 lb/gal, Strike @ 1.183 lb/gal
b. Liquid Additive @ 56 ml/gal
Solution Maintenance:
Routine analytical and trouble-shooting procedures are performed on a daily basis.
Temperature:
Although the Zinex Cobre bath can operate between 40ºF and 170ºF, the best results have been
obtained at 140º - 150ºF.
Copper Metal Mass:
7.2 grams (0.25 oz.)/square foot/0.0003 ins.
